Free engineering tool

Flange Bolt Kit Builder

Add each flanged joint on your job (pressure class, size, facing and how many), and the builder works out the full nuts and bolts package: stud size and length, two heavy hex nuts per stud, optional washers, and one gasket or R-series ring per joint. Matching items are totaled so you get one clean list to send to Texas Flange sales. Stud counts and lengths come from the Texas Flange bolt and stud chart; ring numbers come from the RTJ face dimensions chart.

  1. 1

    Stud size

    5/8-11 UNC × 3-1/2"

    Qty Studs

    8

    Qty Nuts

    16

Kits = number of identical flanged joints. Extra = spacer, spectacle blind or wafer valve between the flanges, in inches. It is added to the stud length, rounded up to the next 1/4 inch.

Reference tool for planning and quoting. Confirm against the purchase specification and your site's procedures before use.

Request a flange quote

Frequently asked questions

What is in a flange bolt kit?

A flange bolt kit has everything needed to bolt up one flanged joint: the stud bolts, two heavy hex nuts per stud, and usually the gasket. Some specs also call for hardened washers. A 4 inch Class 150 raised face joint takes 8 studs, 5/8 inch by 3-1/2 inches, 16 nuts and one gasket.

Which bolting material should I use?

ASTM A193 B7 studs with A194 2H heavy hex nuts are the usual choice for carbon steel flanges. B7M with 2HM is often used in sour service, A320 L7 with Grade 7 nuts in low-temperature service, and B8 or B8M with Grade 8 or 8M nuts in stainless systems. Follow your piping specification.

Do RTJ flanges use a different bolt kit?

Yes. Ring type joint flanges need longer studs than raised face flanges because of the gap the ring leaves, and they take an R-series ring gasket instead of a flat or spiral wound gasket. The builder picks the ring number for you.

How do I size studs for a spectacle blind or wafer valve?

Enter the thickness of whatever sits between the flanges in the extra field. The builder adds it to the standard stud length and rounds up to the next 1/4 inch. Check the final length against the actual stack-up.

Can Texas Flange supply the whole kit?

Yes. Use the email button to send the list to Texas Flange sales, or request a quote with your sizes, classes, materials and quantities.

The Parts You Need, When You Need Them

Since 1986, Texas Flange has delivered precision Flange solutions with speed, affordability, and expertise. Let’s discuss your project today!

flange-basis