Free engineering tool
Steel Weight Calculator
Work out the weight of steel plate, flat bar, round bar, square bar, hex bar, pipe or tube. Pick the shape and material, enter the size in inches or millimeters and the length, and the calculator gives the weight of one piece and of the whole quantity in pounds and kilograms, plus the weight per foot or per square foot. For rings and discs use the ring weight calculator; for pipe by NPS and schedule use the pipe schedule & weight calculator.
Plate / flat bar · Carbon / alloy steel
40.84 lb
18.52 kg total for 1 pc
- Weight per piece
- 40.84 lb (18.52 kg)
- Weight per area
- 40.84 lb/ft² (199.39 kg/m²)
- Cross-section area
- 12.000 in² (7,742 mm²)
- Quantity
- 1
Theoretical weight from nominal dimensions and typical density. Mill tolerances, corner radii and coatings change the real weight, so Texas Flange sales confirms shipping weight with your quote.
Reference tool for planning and quoting. Confirm against the purchase specification and your site's procedures before use.
Request a flange quoteFrequently asked questions
How do you calculate the weight of steel?
Multiply the cross-section area by the length to get the volume, then multiply by the density. Carbon steel weighs about 0.2836 lb per cubic inch (7.85 g/cm³), so a 1 inch thick plate 12 by 12 inches weighs about 40.84 lb.
How much does a 1 inch steel round bar weigh per foot?
About 2.67 lb per foot in carbon steel. A 1 inch square bar is about 3.40 lb per foot and a 1 inch hex bar (across flats) about 2.95 lb per foot.
Is stainless steel heavier than carbon steel?
Slightly. 304 and 316 stainless are about 2% heavier than carbon steel for the same size, duplex 2205 is close to carbon steel, and aluminum is roughly a third of the weight.
How do I find the weight of steel pipe?
Choose Pipe / tube and enter the outside diameter and wall thickness. A 6 inch standard wall pipe (6.625 inch OD, 0.280 inch wall) comes out at about 18.99 lb per foot. To pick a size by NPS and schedule, use the pipe schedule & weight calculator.
Are these exact weights?
No. They are theoretical weights from nominal dimensions and typical densities. Mill tolerances, corner radii, coatings and the exact alloy change the real weight, so Texas Flange sales confirms shipping weight with your quote.
