Free engineerin' tool
Flange Bolt Kit Builder
Add ever' flanged joint on your job (pressure class, size, facin' and how many), and the builder figures out the whole nuts and bolts package: stud size and length, two heavy hex nuts per stud, washers if you want 'em, and one gasket or R-series ring per joint. Matchin' items get totaled so you end up with one clean list to send to Texas Flange sales. Stud counts and lengths come off the Texas Flange bolt and stud chart; ring numbers come off the RTJ face dimensions chart.
- 1
Stud size
5/8-11 UNC × 3-1/2"
Qty Studs
8
Qty Nuts
16
Kits = how many identical flanged joints. Extra = a spacer, spectacle blind or wafer valve sittin' between the flanges, in inches. It gets added to the stud length and rounded up to the next 1/4 inch.
This here's a reference tool for plannin' and quotin'. Check it against your purchase spec and your site's procedures before y'all go usin' it.
Get y'all a flange quoteQuestions Folks Ask Us
What's in a flange bolt kit?
A flange bolt kit's got everything you need to bolt up one flanged joint: the stud bolts, two heavy hex nuts per stud, and most times the gasket. Some specs call for hardened washers too. A 4 inch Class 150 raised face joint takes 8 studs, 5/8 inch by 3-1/2 inches, 16 nuts and one gasket.
Which boltin' material should I use?
ASTM A193 B7 studs with A194 2H heavy hex nuts are the usual pick for carbon steel flanges. B7M with 2HM gets used a lot in sour service, A320 L7 with Grade 7 nuts in low-temperature service, and B8 or B8M with Grade 8 or 8M nuts in stainless systems. Go by your pipin' spec.
Do RTJ flanges use a different bolt kit?
Yeah. Ring type joint flanges need longer studs than raised face flanges on account of the gap the ring leaves, and they take an R-series ring gasket 'stead of a flat or spiral wound gasket. The builder picks the ring number for ya.
How do I size studs for a spectacle blind or wafer valve?
Put the thickness of whatever's sittin' between the flanges in the extra field. The builder adds it to the standard stud length and rounds up to the next 1/4 inch. Check that final length against the real stack-up.
Can Texas Flange supply the whole kit?
You bet. Use the email button to send the list to Texas Flange sales, or ask for a quote with your sizes, classes, materials and quantities.
