Alternate Flange Facing
Alternate Flange Facings
LARGE MALE AND FEMALE
LAP JOINT
SMALL TONGUE AND GROOVE
SMALL MALE AND FEMALE
SMALL MALE AND FEMALE ON END OF PIPE
RAISED FACE
LARGE TONGUE AND GROOVE
(Click any image above to enlarge it and lock it in place, then scroll to the bottom table for dimensions)
Regular facing for 150 and 300 lb. Steel flanged fittings and flange standards is a 1/16 inch raised face included in the minimum flange thickness. A 1/16 inch raised face is also permitted on the 400, 600, 900, 1500, and 2500 Lb. Flange standards, but it must be added to the minimum flange thickness.
Regular facing for 400, 600, 900, 1500, and 2500 lb. Flange standards is a ¼ inch raised face not included in minimum flange thickness dimensions.
Care should be taken in the use of joints of these dimensions, (they apply particularly on lines where the joint is made on the end of pipe) to insure that pipe used is thick enough to permit sufficient bearing surface to prevent crushing the gasket. Threaded companion flanges are furnished with plain face and are threaded with American Standard Locknut Thread.
THE PARTS YOU NEED, WHEN YOU NEED THEM
We’re here to help with your flange needs. Texas Flange has been in the business of precision flange manufacturing since 1986, and we’re confident we can help you find a solution more quickly, affordably, and with greater expertise than the competition. We’d love to learn more about your project today!
