Alternate Flange Facin'
Alternate Flange Facings
LARGE MALE AND FEMALE
LAP JOINT
SMALL TONGUE AND GROOVE
SMALL MALE AND FEMALE
SMALL MALE AND FEMALE ON END OF PIPE
RAISED FACE
LARGE TONGUE AND GROOVE
(Click any image above to blow it up and lock it in place, then scroll on down to the bottom table for dimensions)
Regular facin' for 150 and 300 lb. Steel flanged fittings and flange standards is a 1/16 inch raised face included in the minimum flange thickness. A 1/16 inch raised face is also permitted on the 400, 600, 900, 1500, and 2500 Lb. Flange standards, but it's gotta be added to the minimum flange thickness.
Regular facin' for 400, 600, 900, 1500, and 2500 lb. Flange standards is a ¼ inch raised face dat ain't included in the minimum flange thickness dimensions.
Y'all gotta take care when usin' joints of these dimensions (they apply specially on lines where the joint is made right on the end of the pipe) to make sure the pipe you're usin' is thick enough to give a good bearin' surface so you don't go crushin' dat gasket. Threaded companion flanges come fixed up with a plain face and are threaded with dat American Standard Locknut Thread.
THE PARTS Y'ALL NEED, WHEN Y'ALL NEED 'EM
We’re right here to help with your flange needs. Texas Flange been makin' precision flanges straight from the source since 1986, and we’re mighty confident we can help y'all find a solution quicker, cheaper, and with a whole lot more expertise than the other fellas. We’d love to hear all about your project today!
